USB to Serial Convertor
USB60MB
- Connect RS232C serial devices such as barcode scanner, magnetic card reader with serial interface via this converter.
- - REX-USB60MB is a USB to serial converter.
- Up to 230.4Kbps data transfer rate.
- Micro USB (B type Male) connector.
- Power/Transmit/Receive LED indicators.
- The terminal application "USB60Term" published at Google Play.
- Bus powered. no need external power supply.
System Requiremnets
Host machine
- Android tablet and smart phone with free Micto USB B type port.
It must be USB Host mode are supported.
Operating System
- Android OS 3.2, Android OS 4.0 and higher
Specifications
Hardware specifications
| Product Name | USB60MB | |
| Serial Input/Output level | RS-232C level | |
| USB Specification | USB(Universal Serial Bus) Specification Rev. 1.1 | |
| Connector | USB | Micro-USB B male |
| RS-232C | D-Sub9 male (with anchor [#4-40]) | |
| Number of I/O ports | 1 port | |
| Unit Dimensions | 3.35[L] x 1.1[W] x 0.43[H] in (85[L] x 28[W] x 11[H] mm) |
|
| Cable Length | Approx. 2.83 ft (85 cm) | |
| Weight | 0.194 oz (55 g) | |
| Data transfer mode | Asynchronous (Start stop synchronization) | |
| Data transfer Rate (Baud) | 300/600/1,200/2,400/4,800/9,600/19,200/38,400 57,600/115,200/230,400 bps |
|
| Transmit Distance | Within 50ft (15 m) | |
| Power Voltage | DC+5V (Powered for USB Bus) | |
| Power Consumption | Average: 36mA(5V) Max.: 60mA(5V) | |
| Serial Parameter | Data bit: 7/8 Start bit:1 Stop bit: 1/2 Parity bit: even/odd/none |
|
| RS-232C connector | D-SUB 9PIN RS-232C connector Male ANSI/EIA/TIA-574 |
|
| LED Indicators | PWR：Power LED If the power from USB bus is properly supplied 5V, this indicator LED will be on. TXD：Transmit data indicator (Host to Device) RXD：Receive data indicator (Device to Host) |
|
| Operating Environment | Temperature |
0 to 50 degrees Celsius |
| Humidity | 10 to 90% (non condensing) | |
| Storage Environment | Temperature | -20 to 65 degrees Celsius |
| Humidity | 10 to 90％ (non condensing) | |
Note:
1. Do not remove while the application is communicating. System will be unstable.
2. Do not operate to suspend. System will be unable to resume properly.
3. This product does not support the serial mouse for connecting to RS-232C port.
Product Overview
The pin assignment of the connector.
| Pin # |
Signal name | Direction DTE - DCE | Meaning |
| 1 | DCD | « | Data Carrier Detected |
| 2 | RCD | « | Received Data |
| 3 | TXD | » | Transmitted Data |
| 4 | DTR | « | Data Terminal Ready |
| 5 | GND | - | Signal Ground |
| 6 | DSR | « | Data Set Ready |
| 7 | RTS | » | Request to Send |
| 8 | CTS | « | Clear to Send |
| 9 | RI | « | Ring Indicator |
Service & Support
- Manual / Drivers
all products
