Isolated I2C Digital I/O board for Raspberry-Pi
RPi-GP10(T/M)
- Digital Input/Output board suitable for FA/LA machine.
- 8ch Input and 8ch Output ports on HAT size board.
- Two models are prepared. (Terminal block model and MIL connector model)
- Adopt digital isolator for fast transmission.
- Common power terminal for power supply to I/O terminal and grounding.
- Open sample source code and setup guide to use this product on Rasperry Pi.
Specifications
Hardware specifications
| Product name | Isolated I2C Digital I/O board for Raspberry Pi |
|
| Model numder | RPi-GP10T（Terminal block model） RPi-GP10M（MIL connector model） |
|
| Interface | GPIO40pins > I2C | |
| I/O Expander | TI TCA9535 | |
| Input | 8ch High-voltage diode VIH = 3.5V, VIL = 1.5V, Maximum withstand voltage 30V（Negative logic） Pull up with 5V/10k ohm |
|
| Output | 8ch DMOS Open drain（Negative logic） Maximum current 100mA/ch（ON） Maximum withstand voltage 30V（OFF） Default ON : 2ohm resistance |
|
| Trigger(input) | 1ch High-voltage diode VIH = 2.0V, VIL = 0.8V, Maximum withstand voltage 30V（Negative logic） Pull up with 5V/10k ohm |
|
| Strobe(output) | 1ch Open collector（Negative logic） Maximum current 50ｍA（ON） Maximum withstand voltage 30V（OFF） |
|
| Common power | COM＋： 5～24V | |
| Connector type： RPi-GP10T |
Phoenix Contact PTSA 0,5/**-2,5-F or compatible Wire diameter ：AWG24～20, Strip length:9mm |
|
| Connector type： RPi-GP10M |
OMRON XG4A-2034 or compatible Compatible connector OMRON XG5N-201-AWG26～22 For flat calbe OMRON XG4M-2030 |
|
| Isolation voltage | 2.5kV（Digital I/O to GPIO40 pins） *Each digital I/O is non-isolated. |
|
| Required power | +5V/+3.3V(provided by GPIO) | |
| Consumption current | MAX 5V/150mA, 3.3V/15mA | |
| Operating Environment | Temp ： 0 to 40 degrees Celsius Humid ： 20 to 80%（non condensing） |
|
| Dimensions | 65.0 x 56.5 mm *Protrusions are not included in the dimensions. |
|
| Weight | Approx 25 g | |
| Product content | RPi-GP10（T type or M type） GPIO 40P pin header M2.6 spacer x4 M2.6 screw x8 appended document warranty |
|
| Software | Python3 sample program | |
| Warranty | 1-year | |
| Manufacture(Country) | Japan | |
Product Photo
Service & Support
- Manual / Drivers
all products
