Digital Input/Output board suitable for FA/LA machine.

RPi-GP10T / RPi-GP10M are isolated digital input/output board that plug into 40Pin GPIO connector on a Raspberry Pi.
Using this product pluged into Raspberry Pi makes it possible to output digital signal to device and input digital signal from device.

8ch Input and 8ch Output ports on HAT size board.

This product has 8ch input and 8ch output ports on HATboard(65mm x 56.5mm) designed for use with Raspberry Pi, and can connect to multiple devices and control them at the same.

Two models are prepared
(Terminal block model and MIL connector model)

There are two different types of connectors on Rpi-GP10 series, one is terminal block model that is easy to connect wire, and another is MIL connector model(20pin) that has lock mechanism to avoid unpluging harness.

Adopt digital isolator for fast transmission.

Digital isolator that can isolate electrically between digital I/O and GPIO40PIN is adopted as the isolating element.
It enables lower power consumption(low-heat-generating), smaller footprint, faster signal trasmission than standard photocoupler isolation.

Common power terminal for power supply to I/O terminal and grounding.

RPi-GP10 series have common power terminal for connecting to I/O device required to be grounded, supplying power to reserve power.
* Support for wide range of input voltage 5-24V.

Open sample source code and setup guide to use this product on Rasperry Pi.

Setup guide and sample source code to control this product are opened on our web page.
We prepare some documents such as operation procedure for quickly.use.