| 詳細 |
| 製品名 | eSATA リムーバブルRAIDケース(外付け5ベイ） |
| 製品型番 | SA-DK5-ESR |
| ディストリビューション | Fedora Core 10 x64 (Linux Kernel 2.6.27.12-170.2.5.fc10.x86_64) |
| Linux用ドライバの入手方法 | ドライバは HOST ADAPTER DRIVER (Port
Multiplier 1.1)に含まれています。 これは、Fedora 10 (Linux Kernel 2.6.27.5-117.fc10)に含まれています。 |
| ドライバ名 | sata_sil24(Port Multiplier 1.1) |
| インストール方法 | OSインストール時、 kernel: ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0) kernel: ata7.15: Port Multiplier 1.1, 0x197b:0x0325 r0, 15 ports, feat 0x5/0xf kernel: ata7.00: hard resetting link kernel: ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) kernel: ata7.01: hard resetting link kernel: ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320) kernel: ata7.02: hard resetting link kernel: ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 320) kernel: ata7.03: hard resetting link kernel: ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 320) kernel: ata7.04: hard resetting link kernel: ata7.04: SATA link down (SStatus 0 SControl 0) kernel: ata7.05: hard resetting link kernel: ata7.05: SATA link down (SStatus 0 SControl 0) kernel: ata7.06: hard resetting link kernel: ata7.06: SATA link down (SStatus 0 SControl 0) kernel: ata7.07: hard resetting link kernel: ata7.07: SATA link down (SStatus 0 SControl 0) kernel: ata7.08: hard resetting link kernel: ata7.08: SATA link down (SStatus 0 SControl 0) kernel: ata7.09: hard resetting link kernel: ata7.09: SATA link down (SStatus 0 SControl 0) kernel: ata7.10: hard resetting link kernel: ata7.10: SATA link down (SStatus 0 SControl 0) kernel: ata7.11: hard resetting link kernel: ata7.11: SATA link down (SStatus 0 SControl 0) kernel: ata7.12: hard resetting link kernel: ata7.12: SATA link down (SStatus 0 SControl 0) kernel: ata7.13: hard resetting link kernel: ata7.13: SATA link down (SStatus 0 SControl 0) kernel: ata7.14: hard resetting link kernel: ata7.14: SATA link down (SStatus 0 SControl 0) kernel: ata7.00: ATA-7: WDC WD1001FALS-00J7B0, 0956, max UDMA/133 kernel: ata7.00: 1953525168 sectors, multi 16: LBA48 kernel: ata7.00: configured for UDMA/100 kernel: ata7.01: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133 kernel: ata7.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) kernel: ata7.01: configured for UDMA/100 kernel: ata7.02: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133 kernel: ata7.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) kernel: ata7.02: configured for UDMA/100 kernel: ata7.03: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133 kernel: ata7.03: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) kernel: ata7.03: configured for UDMA/100 kernel: ata7: EH complete kernel: ata8: SATA link down (SStatus 0 SControl 0) kernel: ata9: SATA link down (SStatus 0 SControl 0) kernel: ata10: SATA link down (SStatus 0 SControl 0) kernel: scsi 6:0:0:0: Direct-Access ATA WDC WD1001FALS-0 0956 PQ: 0 ANSI: 5 kernel: sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) kernel: sd 6:0:0:0: [sdb] Write Protect is off kernel: sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA kernel: sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) kernel: sd 6:0:0:0: [sdb] Write Protect is off kernel: sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA kernel: sdb: unknown partition table kernel: sd 6:0:0:0: [sdb] Attached SCSI disk kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0 kernel: scsi 6:1:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 kernel: sd 6:1:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) kernel: sd 6:1:0:0: [sdc] Write Protect is off kernel: sd 6:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kernel: sd 6:1:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) kernel: sd 6:1:0:0: [sdc] Write Protect is off kernel: sd 6:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kernel: sdc: unknown partition table kernel: sd 6:1:0:0: [sdc] Attached SCSI disk kernel: sd 6:1:0:0: Attached scsi generic sg3 type 0 kernel: scsi 6:2:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 kernel: sd 6:2:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB) kernel: sd 6:2:0:0: [sdd] Write Protect is off kernel: sd 6:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kernel: sd 6:2:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB) kernel: sd 6:2:0:0: [sdd] Write Protect is off kernel: sd 6:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kernel: sdd: unknown partition table kernel: sd 6:2:0:0: [sdd] Attached SCSI disk kernel: sd 6:2:0:0: Attached scsi generic sg4 type 0 kernel: scsi 6:3:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 kernel: sd 6:3:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB) kernel: sd 6:3:0:0: [sde] Write Protect is off kernel: sd 6:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kernel: sd 6:3:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB) kernel: sd 6:3:0:0: [sde] Write Protect is off kernel: sd 6:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kernel: sde: unknown partition table kernel: sd 6:3:0:0: [sde] Attached SCSI disk kernel: sd 6:3:0:0: Attached scsi generic sg5 type 0 を自動認識します。 |
| 補足 | RAIDモード変更等のユーティリティ（RAIDマネージャ）は用意しておりませんので、Windowsの環境でRAIDモードの変更をおこなってください。 RAID5の場合は、RATOC H/W RAID5を自動認識いたします。 kernel: ata7.00: ATA-7: RATOC H/W RAID5, 0956, max UDMA/133 kernel: ata7.00: 5860294656 sectors, multi 16: LBA48 kernel: ata7.00: configured for UDMA/100 kernel: ata7: EH complete |
| ユーザー様からの情報 | 特になし |
(2009.12.03現在)